RT220 TENT PEG


$4.00 USD
- Points awarded

Free shipping on Int'l orders 30000JPY+.



Free shipping on International orders 30,000JPY+ from Japan

International orders and international shipping are available. Orders will be shipped from Osaka by EMS. Shipping cost will be calculated at checkout.



Lightweight pegs made in Switzerland from molded reinforced plastic.
The RT series was the first Piranha Peg item, and this marked the start of a new peg series.

*Although it is made of high-strength reinforced plastic, it is not suitable for hard ground such as the Northern Alps.

ABOUT PIRANHA TENT PEG

Features of Piranha Pegs

Piranha-like bite

Its X-shaped peg shape and saw-like teeth at the tip dig into the ground with the tenacity of a piranha.

Safety

By driving the head part flat into the ground, the stress of getting caught on the peg or tripping is reduced, resulting in safety.

Ease of use

The four grooves make it convenient and functional, as you can wrap the guy lines around them and adjust their length.

Product Features

- Ideal for camping, hiking, etc.
- The X-shaped design and piranha-like jagged teeth provide a strong grip in the ground.
- The pegs themselves should be inserted vertically into the ground, without any tilt.
- Flat head prevents tripping and injury around the tent
- Hard to bend
- The guy line can be fixed in place by entangling it in the groove on the head.
- No sharp edges, will not damage tent fabric

Specifications
- Weight: 34g
- Length: 220 mm
- Head diameter: 30mm
- Temperature range: -30 - 110℃
- Country of Origin: Switzerland


Environmental friendliness
- Compared to aluminum molding, the manufacturing process requires only 1/13 of the energy
- Red color stands out in nature, making it easy to find and hard to lose
- If you no longer need RT pegs, please do not throw them away. After cleaning them up, such as by removing the dirt, please send them to STATICBLOOM. They will all be sent to Piranha headquarters, where they will be recycled and reborn as Piranha BF pegs.

Care and Precautions
- After use, wash off any dirt or dirt, dry thoroughly and store.
- If it gets bent, you can return it to its original shape by heating it in an oven at 160 degrees for 5 minutes. Please be careful not to burn yourself during this process.
- Even reinforced plastic pegs can bend when exposed to hard ground or rocks. They are not invincible.
- They are not as sharp as aluminum pegs, so they may not be easy to hammer into hard ground (on the other hand, they hold well on soft ground such as grass or weeds).

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)