A backpack that inherits the DNA of UltraPace and is suitable for a wide range of uses
Compared to the UltraPace, which prioritizes lightness and durability, the AlpinePace is suitable for more uses, such as being able to attach a hydration pack and having a rope attached to the top of the main body so that it can be carried on the back.
The main body is made of recycled nylon fabric with a water pressure resistance of 30,000 mm, and the shoulder harness is fitted with a dial-type "atop" system. The chest strap is secured at two points, top and bottom. The bottom is made with a stretch cord. The top of the main body is tightened with a cord and then covered with a flap. The tape used to secure the flap can also be used to temporarily secure ropes or clothing that has been removed.
This model is suitable for sport climbing, mountaineering, and hiking, but also comes with attachments for poles, axes, and skis. It will be a backpack that you will use often throughout the year.
To adjust the fit, simply turn the "atop" dial on the side. You can make fine adjustments to suit the amount of luggage you have and the amount of clothing you wear. If it's too tight, simply turn the dial in the opposite direction to release it and turn it again. Because of its high level of fit, it can keep up with your intense movements, allowing you to concentrate on your mountain climbing without stress.
The side pockets are approximately 15cm deep at their deepest, and there is also a non-zippered pocket on the outside for quick access to small items.
*This item has seam tape applied to all stitching lines to achieve high waterproof performance. However, due to the structure of the backpack and the hardness of the fabric, it is generally difficult to sew seams neatly like rain gear or tents, so we do not advertise complete waterproofing. In addition, the seam tape may be damaged by interference with gear, resulting in a decrease in waterproofing.
SPEC
Capacity: 20+3L
- Body size: Height 450mm x Width 250mm x Thickness 180mm
- Weight: 490g (440g main body, 50g ski and ice axe holder)
- Minimum weight: 440g
- Back length: 45 cm
- Shoulder harness length: 52 cm
- Shoulder strap maximum extension: 40 cm
- 1 outer pocket
Chest left and right (two compartments structure with water bottle inserted from the top and separate compartments from the zipper) x 1 each *Can store 350ml PET bottles Bottom left and right sides of main body x 1 each
Hydration pack storage sleeve on the inside back of the main body
material
- Body: Recycled nylon 400D ripstop - White TPU (Water column resistance: 30,000 mm)
- Back foam: 4mm EVA
accessories
- Elastic strap for ski hold (used on chest side)
- Ski hold ring (for use on the back)
- 4 pole holder straps
The following preset ice axe attachment parts (4 parts in total, 1 each on the top, bottom, left and right)
Feature Brands
