Knife sharpening compound black green white set (with spatula)

Knife sharpening compound is Bushcraft JP's original knife compound.
Adopts a silicon carbide abrasive, and goes well with the Bushcraft original strop.
A set of 3 fine threads (#3,000, #6,000, #12,000) / with wooden spatula for compounding.
*Triple side BOX straps are sold separately.

The size is designed so that three compounds and a wooden spatula can be stored inside the triple side box strop (strop).

In the maintenance of knives so far, did you put sandpaper (waterproof paper) on the strop or use stone type (ceramic or diamond) for sharpening at the correction level?
Bushcraft JP offers a lineup of #600, #1,200, #3,000, #6,000, and #12,000 to keep the beautiful convex shape from the correction stage.

Finer compounds exist, but even #12,000 can achieve a mirror finish, which is more than sufficient.
In addition, Bushcraft JP offers a relatively coarse grain size of #600, so it can be used for a wide range of knife stroping and maintenance.

If you use #600, you will have a roughness that allows you to modify the overall geometry such as chips (blade chips), secondary bevels, microbevels, etc.
The grain size is a little finer for repairs, but when repairing expensive knives, you can rest assured that this grain size will not cut too much.

For stroping your knives, we recommend the full set of 5 Knife Sharpening Compounds from #600 to #12000.


[Merits of bushcraft original compound]

■ Bushcraft JP compound in paste form Easy to apply thinly and evenly.
For this reason, the blade moves very smoothly on the strop, and the uniformity makes it possible to sharpen evenly.
Even when the abrasive component gradually builds up, it is easy to peel off, allowing you to use the strop for a long time.

The trick is to apply thinly and evenly so that the leather of the strop does not turn white. That's the trick to good sharpening.

If you are already using a compound such as Bark River, it may be a good idea to purchase a single item or purchase only the red and blue set according to your budget.


* Regarding symptoms such as compound hardening and separation
After boiling the entire compound container in hot water, stirring the contents well with a wooden stick or the like may solve the problem.

* Regarding maintenance when used for strop
with a brush made of brass or harder stainless steel
If you clean the compound attached to the strop, the effect of the strop may be restored.

There may be minor scratches during transportation. Please note.

In particular, there may be dents, etc. on the cap part, but it is within a range that does not interfere with use.

【spec】

・Silicon carbide abrasive
・Paste (hard like peanut butter)
・#3,000 maintenance (finishing) rough
・#6,000 Medium finish
・#12,000 super finish fine


【specification】

・ Contents about 100g
・Container size about 115x32mmΦ